Abrasive water jet cutter, waterjet cutters

Tips for the Proper Handling of Waste from Abrasive Waterjet Cutters

Abrasive water jet cutterOperating abrasive waterjet cutters treats facilities to a lot of benefits in addressing various cutting needs, from small shops to large complexes. Ensuring their optimal functionality is therefore a top consideration that any facility manager should always remember. Maintaining them and calibrating them to their optimal performance are also important.
But it should not stop at reaping rewards from our waterjet machines. Operating a waterjet machine also necessitates responsibility and accountability, especially where processing waste is concerned. To make sure that your facility steers clear of potentials for hefty fines and health hazards, remember these tips.

Know your local regulations. The rules that govern the safe handling and treatment of wastes from abrasive waterjet cutters are subject may be localised. As such, it is important to get in touch with the right agency or department and find out about what you need to know to make sure that you are not unintentionally breaking the law.

Understand your operation. It is also advisable to come to terms with all that is involved in your operations, particularly where the specific type of abrasive is concerned. Garnet, for instance, is considered to be a relatively safe material that will not require much by way of handling. The amount of scrap material in the abrasive should also be checked; if it is not a lot, it will most probably not lead to issues.

Lead and beryllium copper, on the other hand, are a different matter. Stainless steel, too, should also raise concerns if it contains high amounts of chrome or nickel.

Do water samples regularly. There is reportedly a small percentage of facilities that test positive in the presence of hazardous wastes. Still, it is good practice to make sure that yours remains safe by doing water tests regularly. Ask about local limits for heavy metals, and check that against your results.

If you do not have a complete system set up for water samples testings, ask your waterjet cutter supplier for samples from production cuts and have them tested.