The Advantages of Sonic Drilling According to Sonic Drill Rig Manufacturers

According to the insiders from the industry and sonic drill rig manufacturers, sonic drilling is way more advantageous than other alternative methods of drilling techniques. For a better understanding of this, we must get a good glimpse of how sonic works. This will help give us a mental picture of how it is being carried out. 

How Sonic Drilling Works? 

Sonic drilling will send an extremely high-frequency vibration and this will be coming from the drill head, passing this through the drill string, then to the drill bit. The machine operator or the staff manning the sonic drill rig will make necessary adjustments to the resonance frequency so that it can accommodate the soil or type of rock being drilled into. The frequency here is usually between 50 hertz to 150 hertz. 

The level of resonance created here will help induce fluidization of the soil or rock at the drilling surface. In more ways than one, this is comparable to how a hot knife can pass through a nugget of cold butter. By reduced friction through sonic drilling, it allows for sonic drilling speeds to reach at least 3 – 5 times faster as opposed to traditional methods of drilling.

The amount of reduced friction here will negate for the use of lubricants or mud while drilling process is still ongoing, where the only thing that would be required would be water to flush away the cuttings or sometimes compressed air can be utilized also. Sonic drill rigs are powerful enough for it to be able to dig through depths up to 300 feet or 100 meters.  

Capabilities of Sonic Drilling 

  • Continuous core sampling with 6 to 8 in core barrels
  • PQ3 and HQ3 diamond coring
  • Downhole packer for aquifer testing or injection
  • Pitcher barrel sampling
  • Zone sampling or otherwise known as isolated groundwater sampling
  • Other alternative sampling strategies that can be looked into upon request 
  • Drilling depths that can go deep up to 700 ft. The borehole diameters of which could be anywhere between 6 to 12 inches 
  • Angle drilling capabilities that are from vertical to 45 degrees
  • Rubber track-mounted rigs are capable of climbing a 30-degree angle from horizontal
  • Rubber track skid support steer unit, this is usually supplied with every sonic rig

Design Features  for Success

Each component of the sonic drilling rig is geared towards maximizing efficiency, accuracy, and safety so you can seamlessly get the job done right the first time. The arms control panel highlights an intuitive layout which lets the staff operator carry out several tasks effortlessly. 

Pumps, speeds, and feeds are precisely dialed in with the aid of electronic controlling system.  As for the rod handling system, it will help in enhancing productivity and safety, while at the same time it lowers the likelihood of the occurrence for operator fatigue.

Conclusion: 

According to sonic drill rig manufacturers, while the working principle behind the sonic drill is giving us a complicated, difficult to- deal with the impression, the truth here is the machine itself is pretty easy and simple to operate. The driller is only required to add in vibratory energy to the standard rotary motion. He has the full liberty to choose for himself the frequency to which in his best judgment will give the drilling rate he is looking for.  

Why Use Bunded Tanks for Your Heating Oil Storage?

There is a manifold of good reasons why you should make use of bunded tanks to contain your heating oil. They are well-designed, suitable for domestic and commercial applications and most importantly, they are durable. In order to really understand what this kind of liquid storage facilities can offer, it is of paramount importance that we understand the advantages of using them.  

The natural tendency of any individual upon hearing the name of an object, machine, or just about anything and the purpose or value of which is completely unknown or irrelevant to them, they would just brush it off as nothing. Unless you are involved in this industry, you won’t bother yourself about the value and difference between certain types of oil tanks. 

Many people don’t know what the word “bunded” means in this context, although this kind of liquid storage tank has been practically used for a very long time in various domestic and commercial purposes.  

Why Use Bunded Tanks for Your Heating Oil Storage?

How Does a Bunded Tanks Work? 

This type of storage facility for high-value liquids makes use of a tank-within-a-tank approach. This signifies that even if your inner tank, which will contain your heating oil, fuel, or any other petrochemical products you want a store in, gets damaged and there are leaks or spillage in the inner tank occurs, your high-value liquid will not stand a chance of contaminating the surrounding environment.

Compared to other types of liquid storage tanks, these liquid-containment facilities are fuel efficient offering great value and savings for your money. It is literally a combination of two tanks working together as one, and thus helpful in preventing leakage risks, and therefore it is very helpful in saving you money.  

High-level of safety is integrated into the very design of bunded oil tanks. This type of liquid storage facility is fast gaining attention and popularity these days and this growing demand for it can be attributed to the fact that they are safe, secure, easy to install, and most importantly, you can easily relocate them from one area to another. 

Another key factor why bunded tanks are in high demand these days is because it allows for keeping your fuel or petrochemical liquids in great shape. Since they are easy to maintain and provide you seamless access for cleaning when necessary, then it is fairly easy to keep this kind of tank in great shape. 

A tank that is great shape will work to your advantage in the sense that it will be able to keep your fuel or any other high-value liquid stay fresh for longer. This happening will also mean that your vehicles or machinery are likely to run more efficiently, benefiting your business overall.  

If your business is somewhat involved in the use or requires you to constantly have an adequate amount of fuel, oil or any other high-value liquid, you will see and understand the value of safety on this regard. Contrary to the use of traditional fuel tanks, which are usually designed to have a single skin design, which is fairly okay just that it creates a thin line between having spillage and a host of other consequential problems.

By having a bunded tank for your fuel, you have a safety margin by virtue of its outer tank shell. It will carefully contain your liquid safely inside its core tank while having as well an ample amount of space in the event that there is an accidental spill or if leaks occur.  Check out this silvan diesel transfer pump here.

Water Jet Cutting Versus Laser Cutting

Choosing the better option between water jet cutting and laser cutting is not as easy and straightforward as most of us think it would be. There is no possible way we can qualify either one of them as the better option.

Each one of them is suitable to use certain materials and applications. Therefore, your choice between the two will be greatly dictated by your own specifications.

You can make use of the following set of questions to help you determine which one would deliver your best expectations.  

  • What type of material are you planning to cut soon?
  • How thick was it?
  • What edge and tolerance finish do you require?
  • Would you mind the presence of heat?

As for how the name of this method of cutting suggests, laser cutting utilizes a strong, concentrated beam of laser light to burn, melt, or vaporize a material. This focused beam of laser light can be static, meaning, you have the liberty to move it across the material.  

Laser cutters are ideal to use on materials that come with a level of thickness ranging between 0.12” to 0.4”. It is commonly used to cut flat sheets of steel of medium thickness.

As for waterjet option, it utilizes a jet of pressurized water. To further intensify its power to cut through materials, abrasives like garnet particles can be added to the water.  The technique allows for cutting a wider spectrum of materials, to close tolerances, cleanly, squarely and most importantly with a good edge finish.

While laser cutting technology is often viewed by many as a complimentary service to waterjet cutting, the latter does prove to offer more advantages as follows:

  • Ability to work with a wider spectrum of materials
  • Cut materials with thickness levels that laser cutting won’t be able to cover
  • The absence of the heat-affected zone (HAZ)
  • More nature-friendly
  • Increased safety level for the user
  • Does not put emphasis on the uniformity of the material
  • Improved tolerance on thicker areas
  • Improved edge finish

While laser cutters are capable of cutting through non-ferrous materials, it can be quite thin, like wood and plastics. However, there is one thing you might get concerned about is the fact that the edge could harbor some burns brought about by the heat generated by the laser method.

On the other hand, with water jet cutting, it is possible you can profile almost all kinds of materials up to 250 mm thickness. There would be very few exceptions as opposed to the laser’s 25 mm thickness.

Conclusion:

Most people who are not very fastidious about the quality of accuracy or finish can be observed to opt instead for laser cutting. So far, the laser cutting method offers the most cost-effective option when it comes to thin parts.

On the other hand, with respect to the ability to stack up sheets and multi-heads, it is evident that the waterjet method is catching up fast. One important factor to look into is that as far as the material thickness is concerned, the more cost-effective waterjet method while the level of thickness increases.  

In Action:  water jet cutter  

Why You Should Use Self Bunded Tanks?

Why You Should Use Self Bunded Tanks?

Practicality is the name of the game and if your business requires you to have large volumes of fuel or petrochemical liquid on site, the use of self bunded tank is your best available solution. So what is a self-bunded tank? It is actually a tank that is within a tank. It is so because it is built with double steel walls, a tank that is encased within another tank. And this special feature intends to effectively protect and secure the fuel or any other liquid that it holds from spillage.   

Another reason why self bunded storage tanks are practical for any type of business is that you can easily relocate them when you need to. Therefore, if your facility is situated in what can be considered as a remote location, you can easily relocate it there. Besides all that, you can request to have it manufactured with respect to the specific requirements that your business organization may have. This type of fuel storage tank also comes with management systems and fuel dispensing features.  

Here are some of the key points that are extremely advantageous to your business’ operations.  

Versatility

Petroleum, chemical and petrochemical applications can be stored using self bunded containers. You can also take advantage of these storage tanks to hold your oil, waste oil and biodiesel. It is a versatile storage tank in such a way that you can easily relocate it to your business site or facility as needed. As for the installation or set up to your facility, it is simple and direct and will not require additional equipment to install.  

Cost Effective

A good quality self bunded storage tank can actually hold enormous amounts of liquids. Normally they can hold 1,000 liters to 150,000 liters. Such amount of fuel stored somewhere inside your facility will work to the advantage of your staff or employees. It eliminates the need for them to leave the company’s premises just to get their vehicles or machines refueled. Hence, reducing the amount of time and resources they need to consume from traveling to and from fuel stations. Aside from that, it’s easy installation feature will help in minimizing related time and cost to have one set up.

Wide Range

Self bunded storage tanks come in several types. The self bunded wraptank and the container wraptank are two of the most fast-rising storage tanks in the business sector. The self bunded storage wraptank comes in a more traditional, round tank. They come available with standard tank fittings, however, you can have them custom-built with respect to your specific requirements.  

The innovatively designed self bunded wraptank container is a round-shaped tank that within another rectangular frame. A storage tank of this type is best described as self-supporting sans any requirement for internal baffles. This measure is helpful in promoting internal access.

As for the tank’s underside, it can be seen from the perspective of the rectangular base. This eliminates the need for the tank to be lifted up to allow for periodic inspection.  

As can be gleaned from above, we can’t deny the fact that self bunded storage tanks in your facility or business location offer are beneficial to your business interest in terms of versatility, durability, and cost-effectiveness.  If running your business requires the incessant consumption of fuel for your pieces of machinery and vehicles, or if you deem it necessary to have a reliable storage system for your company, a self bunded container tank may be the best solution you are looking for.  

24v Diesel Pump and the Other Types You Can Hire

For sure, there are different reasons why one would choose to rent a pump like a 24v diesel pump. Sewage, drainage, and slurry pumping are just a few of them. Thus, knowing the different types can greatly help in order to get one that is really intended for a specific purpose. Doing so will spare you from the trouble of making mistakes and wasting your money and effort.

Different Types of Pumps

Diesel:

Standard Diesel Pump

These are usually used in wastewater applications like in sewage bypasses and drainage projects. Of course, there are other uses such as civil engineering, industrial work, and food alleviation.

Super Silent Diesel Pump

This one performs the same duties as the standard counterpart but it does so without so much noise. Just like a 24v diesel pump, this is perfect for different uses like in residential areas and in places in which the public might get sensitive to high noise.

High Head Diesel Pump

This is often used in quarries where high heads are needed. Greater distances can be pumped in instances where a series of pumps is impossible to be used and higher pressure can be obtained for industrial processes.

Electric:

Electric pump is usually used when the engine driven system is not suitable for the job. It can also be more economical and are ordinarily more compact.

Submersible Clean Water Drainage Pumps

This one is used for water applications (including dirty water), submersible clean water drainage pumps can be used for tunneling, construction dewatering, and industrial process applications.

Submersible Sewage Pumps

This is the kind that is ideal for sludge and sewerage type applications. This is often a cast-iron pump. This type of unit is usually supplied with a float switch so that it can be automatically operated.

Hydraulic:

Standard Hydraulic Pump

Hydraulic system is, naturally, powered by hydraulics and there are several types that are available in the market. This is usually found to be use in drainage or sewerage applications where the depth of liquid would be too great for standard suction systems.

Silent Hydraulic Pump

The silent version of this pump is used in situations where a standard hydraulic system will generate an unacceptable amount of noise.

Pneumatic:

Pneumatic system includes a Blagdon Air Driven Pump which is a portable and small device that can be used water industry applications, in civil engineering and shipbuilding. This is suitable for bulk diesel or oil transfer.

Wellpointing:

Some pumps are best suited to wellpointing or sub ground dewatering. The wellpoint system is normally effective in a wide range of soils, salts and gravels. It is about finding the best one for your purposes.

If you want to find the best pumps out there to do the job for you, you can search online and you will encounter companies like http://fueltankhire.com.au/ that offer quality pumps.

 

wastewater pump

Questions to Ask When Selecting Wastewater Pumps

wastewater pump

Selecting the right wastewater pumps is important to your home or facility’s sewage treatment functionality and cost effectiveness. It also plays a direct role in ensuring proper sanitation in your residence or commercial complex. If you are just about to make a purchase, there is no better time than now to get acquainted with some of the most important things you need to know about making the right purchase. To that end, make sure to consider these questions before selecting your sewage pumps.

Continue reading

Electric Forklifts Repair

Getting Quality Electric Forklifts Repair: A Guide

Bringing in your electric forklift for repair is an undeniable part of industrial operations. And it is also one of the most necessary. Without reactive maintenance, your equipment will not be as functional as it can be. Additionally, incurred costs for component damage and even breakdown will exacerbate the longer you let an issue sit without being fixed.

If you want to make sure that your electric forklifts repair will go the way that it should, mind these tips.

 Electric Forklifts Repair

Continue reading